The function and principle analysis of car wax

June 10, 2020

Neat car capacity, waxing is essential. The driver has a one-sided understanding of this, either frequent waxing, or simply do not play; and the driver believes that the car wax more expensive as possible, specializing in the use of imported car wax. In fact, these practices are not appropriate. So, how should we wax the car? The types and choices of car waxes are different due to the different properties of various car waxes, and their effects and effects are not the same. Therefore, care must be taken when selecting them. Improper selection not only fails to protect the car body, but also discolors the car paint.

1、Why do waxing maintenance for paintwork?

1) After the car is waxed and cured, it can remove stubborn dirt on the paint and form a protective film.

2) It has a good removal effect on the oxide film formed by the car paint and can repair some microcracking gaps of the car paint.

3) Prevent the corrosion of UV, acid, alkali and other substances.

4) Delay the aging of the paint and prolong the service life of the paint.

2. The role and principle of car wax?

(1) Waterproofing - Under strong sunlight, each small water droplet is a convex lens. Under its focus, the focus temperature reaches 800-1000 degrees. Cause paint dark spots, greatly affecting the quality of car paint life. It is also easy to cause corrosion on exposed metal surfaces. Car waxes have a repellent effect on waterborne substances, making water droplets less likely to adhere to the body surface.

(2) Anti-high temperature effect - The anti-high temperature action principle of the car wax is to effectively reflect the incident light from different directions and prevent the reflected light from aging and discoloring the paint and the base paint.

(3) Anti-Static Effect—Electrostatic brings a lot of inconvenience to the driver and may even cause harm. Anti-static effect of car wax is mainly reflected in the surface of the car to prevent static electricity, and its role is to cut off the dust and metal surface friction. Because of the thickness of the wax coating layer and the adhesion ability of the car wax itself, its anti-static function has certain differences. Generally, anti-static car wax is superior to ordinary car wax in blocking the friction of dust and paint.

(4) Anti-ultraviolet effect - As the characteristics of ultraviolet ray determine that the ultraviolet ray is more easily refracted into the paint, the anti-ultraviolet vehicle wax fully considers the characteristics of the ultraviolet ray, so that the damage to the car watch can be minimized.

(5) Polishing - Glazing is the most basic role of car wax, after waxing the vehicle, can improve the brightness of its surface, so that the body to restore bright colors.

3. How often does the car make a wax?

Due to the driving environment of the vehicle and the parking place, the time interval for waxing should also be different. Generally, there are parking garages and vehicles that are mostly on good roads; once every 1-2 months, wax is used; open-air vehicles are parked because of the wind. Blowing rain, it is best to play once a month wax. Of course, this is not a hard rule. When you feel it is not smooth with your hand, you can wax it again.

4, how to play manual wax?

Hand waxing is simple and easy. When waxing by hand, first apply proper amount of wax to the sponge, (special waxing sponge) and then apply a certain number of reciprocating straight lines. Each smear should have 1/5-4/5 overlap with the smeared area. Prevent leaking.

5, how to master the polishing operation?

According to different car wax instructions. Generally, it can be polished after 5-10 minutes of painting, and the principle of polishing after waxing is followed. Due to the heat generated by the friction between the polished ball and the paint surface, a small amount of water is sprayed at the polishing area to reduce heat. Ensure that the polished car's watch is not contaminated or damaged. The polishing operation usually uses a reciprocating linear motion of the non-woven fabric and is pressed with proper force to remove the remaining wax.

6, car wax there are several?

Generally divided into three types: liquid wax, soft wax, solid wax. There are also car waxes that differ according to the color of the car body, usually in three categories: light-colored, dark-colored and silver-pink. The owner chooses according to the car's needs.

7. What are the main functions of liquid wax?

Emphasize the decontamination effect. Usually when the paint surface is dirty and there is stubborn dirt, the use of this product can effectively eliminate these stubborn dirt. And it does not cause any damage to the paint surface and can repair some minor scratches. Make your car bright as new.

8. What are the main functions of solid wax?

Emphasize the protective effect of glazing. After the vehicle has used wax, the varnish forms a high-gloss protective film to prevent the paint from aging.

9. What preparation should be done before waxing?

It is best to use Car Wash water (special car shampoo with a certain proportion of water) to clean the Exterior mud and dust of the car body before waxing. Do not use detergent and soapy water. Because of the sodium oxide component, it can corrode body paint, wax film and rubber parts. Loss of gloss on car paint and aging of rubber parts. If there is no special car wash water, the vehicle can be washed with clean water, and the car body is wiped dry and waxed.

10, how to operate mechanical wax?

Mechanical waxing is highly efficient. Whether it is mechanically waxed or hand waxed, it must be applied evenly. When waxing the machine, apply the car wax to the sponge. The smearing process is the same as the manual process. It is worth noting that painting over edges, corners, and edges should avoid exceeding the paint surface.

11、Which matters should be paid attention to during the waxing process?

The car should be waxed in a cool place to ensure that the car body does not become hot, because with the increase of temperature, the adhesion of car wax becomes worse, and it is easy to dry. Will affect the waxing quality. When waxing, use a special sponge ball to apply a suitable amount of car wax. Apply a straight reciprocating motion on the car body. Do not apply car wax on the car or apply a cylinder. Not to be painted or stopped. After 5 to 10 minutes, apply a new towel. However, the car wax that is required to be wiped off quickly should be painted and polished.

12. What are the precautions after playing car wax?

After the car body is waxed, some car wax remains in the gaps between the lights, license plates, doors, luggage compartments, etc., making the car body look unattractive. Wax scales in these areas may rust if not cleaned in time. Therefore, be sure to clean these corners after waxing.

13, liquid wax, soft wax paint after the care of how to wipe?

Before liquid wax and soft wax are wiped, wait until the car wax is completely dry, and wipe the wax off with a clean towel. When using liquid wax, repeatedly wipe the paint surface repeatedly to remove stubborn dirt. Soft wax, evenly coated with moderate strength.

14, how to wipe after solid wax care?

Use a sponge ball to dip a small amount of wax and apply evenly on the paint. After the wax is dry, wipe it with a clean towel. Since the solid wax is oily, the car body should not be overheated and the wax should not be wiped off when the wax is not dry. Wipe up and stick some dust too early.

15, why the new car waxing?

The new car is generally coated with protective wax when it leaves the factory so as not to scratch the paint during transportation. Therefore, after the new car goes to the ground, it should go to a professional car beauty shop to remove the wax and then apply a new layer of car care wax to protect the bright luster of the new car.

16, the new car waxing steps

1) Body autoclave.

2) Spray wax water. Wait 5-8 minutes for it to completely penetrate the wax layer and quickly dissolve the car wax protective layer.

3) Wipe the car watch with a cotton cloth, towel or non-woven cloth.

4) Thoroughly clean wax residue and all kinds of residual dirt with a special shampoo for the new car.

5) Finally use a special high-grade crystal coating wax for the new car. The car body is coated with a layer of anti-static, anti-aging, anti-acid rain, anti-ultraviolet, strong water repellent, elegant, bright, and strong protective film.

17, how to choose to open wax water?

Waxing water is the most important product for waxing operations. The wax-opening water has a very strong dissolving power and oil decomposition ability to car wax. The car wax can be completely dissolved within 5-8 minutes, and there is no corrosion to the paint, plastic and rubber parts. The new car wax selection wax suit. Namely: open wax water, new car special shampoo, new car special advanced coating wax.

Wax water has a strong oil decomposition and wax removal function, except wax thoroughly. It can also be used to clear asphalt, insects and other stubborn stains and dirt on the car surface.

The above is the The function and principle analysis of car wax we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:How to decorate the car beauty shop? Car beauty shop decoration strategy

Next:Car Wash is [Kidnapped" by the Car Wash Service